24 11 Transmission Housing, Transmission Oil Sump
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TRANSMISSION HOUSING, TRANSMISSION OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Transmission oil sump | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 10 Nm | |
| 2AZ | Oil drain plug | GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8P75H | M16x1.5 M24x1 M18x1 | Plastic oil sump | 8 Nm |
| 3AZ | Oil filler plug | GA6HP26Z/GA6HP32Z | M30x1.5 | 80 Nm | |
| GA6HP19Z/GA6HP26Z/GA6HP32Z/GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8HP90Z/GA8P75H | M18x1.5 | 35 Nm | |||
| 4AZ | Transmission oil sump | GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8HP90Z/GA8P75H | M6 | Replace aluminum screws; jointing torque and angle of rotation must be observed without fail. | |
| 1. Jointing torque | 4 Nm | ||||
| 2. Angle of rotation | 45 ° | ||||
| Steel screws | 10 Nm | ||||
| 5AZ | Oil drain plug | GA8HP90Z | M10 | 12 Nm | |
| 6AZ | Heat shield on gearbox | GA8HP45Z/GA8P70Z/GA8P75H | M8 | 19 Nm | |
| GA8HP45Z | M6 | 8 Nm | |||
| 7AZ | Ground strap to body and transmission | GA8HP45Z/GA8HP50/GA8HP70Z/GA8P70H/GA8P75H | M8 | 19 Nm | |