24 30 Hydraulic/Electric Control Parts And Controlling Elements
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - HYDRAULIC/ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Valve body to transmission | GA6HP19TU/GA6HP26TU | M6 | 8 Nm | |
| 2AZ | Valve housing to valve body | GA6HP19Z/GA6HP26Z/GA6HP32Z | M6 | 5 Nm | |
| 3AZ | Input- and output-speed sensors to mechatronics | M6 | 12 Nm | ||
| 4AZ | Mechatronics to transmission | GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z/GA8P70H | M6x59, M6x20 | 8 Nm | |
| 5AZ | Oil volume accumulator to transmission | GA8HP45Z/GA8HP50/GA8HP70Z | M6x59, M6x20 | 8 Nm | |
| 6AZ | Centring plate to transmission bell housing | GA8HP45Z/GA8HP50/GA8HP70Z/GA8HP90Z | M8X74 | Jointing torque | 10 Nm |
| Torque | 90 ° | ||||
TIGHTENING TORQUE SPECIFICATIONS - HYDRAULIC/ELECTRIC CONTROL PARTS AND CONTROLLING ELEMENTS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil pump to transmission | GA8P70H/GA8P75H | M6 | Replace screws | 8 Nm |
| 2AZ | Wiring harness, oil pump to transmission | GA8P70H/GA8P75H | M6 | Replace screws | 10 Nm |
| 3AZ | Mechatronics to transmission | GA8P75H | M6 | Replace screws | 8 Nm |
| 4AZ | Speed sensor to transmission | GA8P75H | M6 | Replace screws | 4 Nm |