23 11 Housing with lid
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2016 BMW M5, 2016 BMW 535i, 2015 BMW M5, 2015 BMW 535i, and 2014 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - HOUSING WITH LID
| TRANSMISSION DESIGNATION | Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|---|
| 1AZ | Transmission housing, rear section/front section | B/C/D/E/F/G/H/I/7-speed SMG | 22 Nm | ||
| 2AZ | Cover with guide tube/transmission case | B/C/D/E/F/G/H/I/C/7-speed SMG | M8 x 22 | 18 Nm | |
| B/C/D/E/F/G/H/I/C/7-speed SMG | M8 x 30 | 25 Nm | |||
| B/C/D/E/F/G/H/I/C/7-speed SMG | M6 | 10 Nm | |||
| 3AZ | Bearing cap/sealing flange | B/C/D/E/F/G/H/I/7-speed SMG | 10.5 Nm | ||
| 4AZ | Reverse gear wheel axle to intermediate housing | B/C/D/E/F/G/H/I/7-speed SMG | 49 Nm | ||
| 5AZ | Retaining plate for reverse gear wheel axle to intermediate case | B/C/D/E/F/G/H/I/7-speed SMG | 25 Nm | ||
| 6AZ | Transmission closing plate | B/C/D/E/F/G/H/I/7-speed SMG | M6 | 8 Nm | |
| 7AZ | Transmission oil strainer in transmission | G-transmission | M18 | 25 Nm | |