11 61 362 Removing and installing/replacing right charge-air duct (N20)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Unlock snap fastener (1) and (2) and remove the charge air guide.

NOTE: Shown with engine/cooling package removed for better overview.

Fig 1: Identifying Charge Air Guide Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Visually inspect the form sealing ring (1) for correct position and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Visually inspect the form sealing ring (1) for correct position and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 3: Identifying VDA Couplings Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.