13 90 500 Replacing tank vent valve (N52T)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Check stored fault messages
Turn off ignition
Remove THROTTLE BODY

Installation location:

Tank vent valve is fitted at bottom on intake plenum.

Unlock plug (1) and remove.

Unlock hose (2) and detach.

Unlock hose (3) on intake manifold and detach.

Detach tank vent valve (4) from holder and remove.

Fig 1: Detaching Tank Vent Valve From Holder

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Read out fault memory of DME control unit.
Delete fault memory.