13 62 Sensors for control unit
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - SENSORS FOR CONTROL UNIT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Camshaft sensor to cylinder head | N52T | M6 | 9 Nm | |
| 2AZ | Crankshaft sensor to crankcase | N52T | M6 | Replace aluminum screws. | |
| Jointing torque | 3 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Knock sensor to crankcase | N52T | M8 | Replace aluminum screws. | |
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 4AZ | Differential pressure sensor to air intake system | N52T | K50x20 | 6 Nm | |
| 5AZ | Coolant temperature sensor | N52T | M12x1.5 | 13.5 Nm | |
| 6AZ | Magnet wheel to eccentric shaft | N52T | M6x20 | 8 Nm | |
| 7AZ | VVT sensor to bearing bracket | N52T | M6x14 | 8 Nm | |
| 8AZ | Hot-film air mass meter | N52T | 2 Nm | ||