13 71 Intake silencer
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INTAKE SILENCER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Hot film air mass meter to clean air pipe | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 U 1/N57 D30 O 1/N57 D30 T 1/N57 D30 S 1 | 2 Nm | ||
| 2AZ | Clean-air pipe upper part to clean-air pipe lower part | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 U 1/N57 D30 O 1/N57 D30 T 1 | Hose clamp | 3 Nm | |
| 3AZ | Clean-air pipe lower part to turbocharger | N57 D30 U 0/N57 D30 O 0/N57 D30 T 0/N57 D30 U 1/N57 D30 O 1/N57 D30 T 1 | M6 | 8 Nm | |
| 4AZ | Intake filter housing to clean-air pipe | N57 D30 T 1 | Hose clamp | 3 Nm | |
| 5AZ | Intake filter housing to intake manifold | N57 D30 T 1 | M6 | 8 Nm | |
| 6AZ | Clean air pipe to exhaust turbocharger | N57 D30 S 1 | M6 | 8 Nm | |
| 7AZ | Intake filter housing to clean-air pipe | N57 D30 S 1 | Hose clamp | 3 Nm | |
| 8AZ | Intake silencer housing to charge air cooler | N57 D30 S 1 | M6 | 8 Nm | |