13 71 Intake silencer
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INTAKE SILENCER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Raw air diversion to lock support | N55/N55 Hybrid | 6 Nm | ||
| 2AZ | Intake silencer upper part to lower part | N55/N55 Hybrid | 2.5 Nm | ||
| 3AZ | Clean air pipe to intake silencer | N55/N55 Hybrid | Clamp | 3 Nm | |
| 4AZ | Hot film air mass meter to top clean air pipe | N55/N55 Hybrid | 2 Nm | ||
| 5AZ | Clean-air duct to cylinder head cover | N55/N55 Hybrid | 3 Nm | ||
| 6AZ | Upper clean air pipe to lower clean air pipe | N55/N55 Hybrid | Clamp | 3 Nm | |
| 7AZ | Lower clean air pipe to air duct | N55/N55 Hybrid | 3 Nm | ||
| 8AZ | Air duct to exhaust turbocharger | N55/N55 Hybrid | 8 Nm | ||
| 9AZ | Lower air duct to cylinder head | N55/N55 Hybrid | 8 Nm | ||
| 10AZ | Lower charge-air duct to upper charge-air duct | N55/N55 Hybrid | 3 Nm | ||