13 51 Injection pump, control
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - INJECTION PUMP, CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure pump to cylinder head cover | S63 B44 T 0 | M6 | Replace screws. Tighten screws in 180° increments uniformly until final torque. Observe repair instruction . See 13 51 065 REMOVING AND INSTALLING/REPLACING LEFT HIGH PRESSURE PUMP (S63 B44 T 0) or 13 51 070 REMOVING AND INSTALLING/REPLACING THE RIGHT HIGH PRESSURE PUMP (S63 B44 T 0) . |
12 Nm |