13 53 Fuel Injector Nozzles and Lines
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FUEL INJECTOR NOZZLES AND LINES
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure rail to cylinder head | S63 B44 T 0 | M6 | 10 Nm | |
| 2AZ | High pressure rail to injector | S63 B44 T 0 | M12 | Initial torque | 10 Nm |
| Final torque (Retorque twice) | 23 Nm | ||||
| 3AZ | High pressure rail to high pressure pump | S63 B44 T 0 | M14 | Initial torque | 10 Nm |
| Final torque (Retorque twice) | 30 Nm | ||||
| 4AZ | Feed line to high pressure pump | S63 B44 T 0 | M14 | Initial torque | 10 Nm |
| Final torque (Retorque twice) | 30 Nm | ||||
| 5AZ | Holding-down element to cylinder head for injection nozzles | S63 B44 T 0 | M7 | 13 ± 2 Nm | |
| 6AZ | Feed line to cylinder head cover | S63 B44 T 0 | M6 | 10 Nm | |
| 7AZ | Retaining clips to holder | S63 B44 T 0 | M5 | 6 Nm | |
| 8AZ | High pressure sensor to rail | S63 B44 T 0 | 30 Nm | ||
| 9AZ | Special tool 2 249 115 to cylinder head cover | S63 B44 T 0 | M7 | 13 Nm | |
| M6 | 10 Nm | ||||