13 53 Fuel Injector Nozzles and Lines
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - FUEL INJECTOR NOZZLES AND LINES
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | High-pressure rail to cylinder head | N63 B44 O 0 | M7 | 13 ± 2 Nm | |
| N63 B40 O 1/N63 B44 O 1 | M6 | 10± 1.5 Nm | |||
| 2AZ | High pressure lines to rail and injector/high-pressure rail on injector | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M12 | Initial torque | 10 Nm |
| Final torque (Retorque twice) | 23 Nm | ||||
| 3AZ | High pressure line to rail and high pressure pump/high-pressure rail to high pressure pump | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M14 | Initial torque | 10 Nm |
| Final torque (Retorque twice) | 30 Nm | ||||
| 4AZ | Feed line to high pressure pump | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | M14 | Initial torque | 10 Nm |
| Final torque (Retorque twice) | 30 Nm | ||||
| 5AZ | Holding-down element to cylinder head for injection nozzles | N63 B44 O 0 | M7 | 13 ± 2 Nm | |
| 6AZ | Tab on the fuel low-pressure sensor/feed line to cylinder head cover and cylinder head | N63 B44 O 0 | M6 | 10 Nm | |
| 7AZ | Retaining clips to holder | N63 B44 O 0 | M6 | 10 Nm | |
| N63 B40 O 1/N63 B44 O 1 | M5 | 6 Nm | |||
| 8AZ | High-pressure sensor to rail, high-pressure side | N63 B44 O 0/N63 B40 O 1/N63 B44 O 1 | 30 Nm | ||
| 9AZ | Low-pressure fuel sensor to feed line | N63 B44 O 0 | 20 Nm | ||
| 10AZ | Special tool 13 0 300 to cylinder head cover | N63 B44 O 0 | 10 Nm | ||
| 11AZ | Special tool 2 249 115 to cylinder head cover | N63 B40 O 1/N63 B44 O 1 | M7 | 13 Nm | |
| M6 | 10 Nm | ||||