LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 768 (Engine - Tightening Torques) >> Water Pump With Drive >> N52 Engine >> 11 51 Electric water pump with drive

11 51 Electric water pump with drive

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ELECTRIC WATER PUMP WITH DRIVE

  Type Thread Tightening specification Measure
1AZ ASA screws
Electric water pump to crankcase.
Aluminum screws/bolts are permitted with and without color coding (blue).
N52T M8 x 32 Replace screws.
Thread repairs exclusively with aluminum Helicoil threaded insert.
Jointing torque and angle of rotation must be observed without fail.
 
Jointing torque 10 Nm
Torque angle 90 °
2AZ ASA screws
Electric water pump to crankcase.
Aluminum screws/bolts are permitted with and without color coding (blue).
N52T M8 x 28 Replace screws.
Thread repairs exclusively with aluminum Helicoil threaded insert.
Jointing torque and angle of rotation must be observed without fail.
 
Jointing torque 10 Nm
Torque angle 90 °