11 36 Variable camshaft control
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | VANOS gear to inlet and outlet camshafts (contact surface on screw head must be greased with ASSEMBLY PASTE 4.4 ) | S63T 0 | M10x1 | Replace screw. | |
| Jointing torque | 30 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | S63T 0 | M14 x 1.5 | 20 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | S63T 0 | M6 | 10 Nm | |