11 28 V-ribbed belt with tensioner/deflection element
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - V-RIBBED BELT WITH TENSION AND DEFLECTION ELEMENT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| Standard belt drive | |||||
| 1AZ | Belt tensioner with deflection pulley to engine block. | N55 | M10 x 90 | 38 Nm | |
| AZ | Belt tensioner with deflection pulley to engine block. | N55 | M10 x 103 | 38 Nm | |
| 2AZ | Deflection pulley 65 x 32 | N55 | M10 x 55 | 60 Nm | |
| 3AZ | Deflection pulley 75 x 32 | N55 | M10 x 55 | 60 Nm | |
| 4AZ | Holder for deflecting element to oil sump | N55 | M10 x 37 | 38 Nm | |
| 5AZ | Holder for deflecting element to oil sump | N55 | M10 x 30 | 38 Nm | |
| 6AZ | Deflecting element 75 | N55 | M10 x 55 | 56 Nm | |
| 7AZ | Deflecting element 90 | N55 | M10 x 55 | 56 Nm | |
| SGR belt (start alternator belt) | |||||
| 8AZ | Belt tensioner to crankcase (operating tensioner) | N55 | M10 x 90 | 38 Nm | |
| 9AZ | Belt tensioner to crankcase (start tensioner) | N55 | M10 x 55 | 38 Nm | |
| 10AZ | Deflecting element 75 | N55 | M10 x 55 | 56 Nm | |
| 11AZ | Holder for deflecting element to oil sump | N55 | M10 x 37 | ASA screw (exterior star handle) | 38 Nm |
| 12AZ | Holder for deflecting element to oil sump | N55 | M10 x 30 | ISA countersunk screw (interior star handle) | 38 Nm |