11 65 Turbocharger and Control
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust manifold to turbocharger (D80 V-band clamp). | S63T 0 | M8 | Replace V-band clamp. | 13 Nm |
| 2AZ | Exhaust turbocharger to primary catalytic converter (D108 V-band clamp). | S63T 0 | M8 | Replace V-band clamp. | 13 Nm |
| 3AZ | Heat shield to heat shield, side. | S63T 0 | M6 x16 | 10 Nm | |
| 4AZ | Heat shield to cylinder head cover | S63T 0 | M6x12 | 10 Nm | |
| 5AZ | Heat shield, bottom, to crankcase/oil return cover. | S63T 0 | M6 x 12 | 10 Nm | |
| 6AZ | Heat shield to crankcase. | S63T 0 | M6 x 12 | 10 Nm | |
| 7AZ | Exhaust turbocharger heat shield and alternator to cylinder head. | S63T 0 | M6 x 12 | 10 Nm | |
| 8AZ | Bracket, electropneumatic pressure converter, to cylinder head. | S63T 0 | M6x18 | 10 Nm | |
| 9AZ | Electropneumatic pressure converter to bracket. | S63T 0 | M6 | 10 Nm | |
| 10AZ | Vacuum tank to oil sump | S63T 0 | M6x25 | 10 Nm | |