11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug | S63T 0 | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | Oil sump upper section to crankcase | S63T 0 | M8x25 M8x45 |
Replace microencapsulated screws | 27 Nm |
| 2AZ | Oil sump upper section to crankcase | S63T 0 | M6x25 | 10 Nm | |
| 3AZ | Oil sump, lower section to upper section | S63T 0 | M6x25 | 10 Nm | |
| 4AZ | Screw plug, oil channel, to oil sump upper section | S63T 0 | M22x1.5 | Replace sealing ring. | 35 Nm |
| 5AZ | Oil condition sensor to lower oil sump section | S63T 0 | M6 | Replace O-ring. 8.5 Nm | |
| 6AZ | Oil temperature regulator to oil sump upper part (control valve) | S63T 0 | M33x2 | Replace sealing ring. | 100 Nm |