11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug to oil sump | N55 | M12x1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | Oil sump (aluminum) to crankcase lower half. | N55 | M8x26 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Oil sump (aluminum) to crankcase lower half. | N55 | M8x92 M8x112 |
Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 4AZ | Oil sump (aluminum) to crankcase lower half (AWD) | N55 | M8x36 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 5AZ | Oil deflector to crankcase lower half. | N55 | M6x20 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 6AZ | Transmission to oil sump. | N55 | M8x50 8.8 | 19 Nm | |
| 7AZ | Oil level sensor to oil sump. | N55 | M6 | 8 Nm | |