11 13 Oil sump

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP

		Type	Thread	Tightening specification	Measure
1AZ	Plug Oil drain to oil sump.	N52T	M12 x 1.5	Replace sealing ring.	25 Nm
2AZ	ASA screw Oil sump (aluminum) to crankcase lower half.	N52T	M8 x 26	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail.
				Jointing torque	8 Nm
				Torque angle	60 °
3AZ	ASA screw Oil sump (aluminum) to crankcase lower half.	N52T	M8 x 112	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail.
				Jointing torque	8 Nm
				Torque angle	60 °
4AZ	ASA screw Oil sump (aluminum) to crankcase lower half.	N52T	M8 x 92	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail.
				Jointing torque	8 Nm
				Torque angle	180 °
5AZ	ASA screw Oil sump (aluminum) to crankcase lower half.	N52T/Allrad	M8 x 40	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail.
				Jointing torque	8 Nm
				Torque angle	90 °
6AZ	ASA screw Oil sump (aluminum) to crankcase lower half.	N52T/Allrad	M8 x 36	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail.
				Jointing torque	8 Nm
				Torque angle	90 °
7AZ	ASA screw Oil sump (sheet metal) to crankcase lower half.	N52T	M8 x 24	Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Joining torque and angle of rotation must be observed without fail.
				Jointing torque	8 Nm
				Torque angle	60 °
8AZ	ASA screw Transmission to oil sump.	N52T	M8 x 50		19 Nm
9AZ	Hexagon nut Oil level sensor to oil sump.	N52T	M6		8 Nm
10AZ	Screw Transmission oil line to oil sump.	N52T	M6		10 Nm
11AZ	Oil deflector to bed plate	N52T	M6 x 20
				Jointing torque	4 Nm
				Torque angle	90 °