11 13 Oil sump
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil drain plug to oil sump of all-wheel drive vehicle. | N20/N26 | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | Oil drain plug to oil sump without all-wheel drive vehicle. | N20/N26 | M12 x 1.5 | Replace plastic screw. | 8 Nm |
| 3AZ | Oil sump (plastic) to crankcase lower section. | N20/N26 | M6 x 25 | 10 Nm | |
| 4AZ | Oil sump (aluminum) to crankcase lower section (all-wheel drive vehicle). | N20/N26 | M6 x 25 M6 x 80 M6 x 120 | 10 Nm | |
| 6AZ | Transmission to oil sump. | N20/N26 | M8 x 50 8.8 | 22 Nm | |
| 7AZ | Oil level sensor to oil sump. | N20/N26 | M6 | 8 Nm | |