11 61 Air intake manifold
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIR INTAKE MANIFOLD
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hexagon screw Air intake manifold to cylinder head. |
N52T | M7 x 50 | 15 Nm | |
| 2AZ | Hexagon nut Air intake manifold to cylinder head. |
N52T | AM7 (to DIN 439) | 15 Nm | |
| 3AZ | Hose clamp Clean-air gaiter to connection, throttle valve assembly. |
N52T | L80-100 | 3 Nm | |
| 4AZ | Ejot screw Fuel line to intake manifold |
N52T | 50 x 20 | 6 Nm | |
| 5AZ | Oval-head screw Holder, engine wiring harness, to intake manifold. |
N52T | M6 x 10 | 8 Nm | |