11 11 Engine block
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Main bearing bolts (steel bolts 12.9 PHR) | N57 D30 U/O 1 | M10x85 12.9 | Replace bolts | |
| 1. Jointing torque | 25 Nm | ||||
| 2. Jointing torque | 50 Nm | ||||
| 3. Angle of rotation | 60 ° | ||||
| 4. Angle of rotation | 60 ° | ||||
| 2AZ | Coolant drain plug on engine block. | N57 D30 U/O 1 | M14x1.5 | Replace sealing ring | 25 Nm |
| 3AZ | Tensioning rail/guide rail | N57 D30 U/O 1 | M10 | Bearing journal | 20 Nm |
| 4AZ | Chain tensioner, bottom | N57 D30 U/O 1 | M6 | 10 Nm | |
| 5AZ | Oil spray nozzle for chain drive | N57 D30 U/O 1 | M6x22 | 8 Nm | |
| 6AZ | Coolant connection to crankcase (feed) | N57 D30 U/O 1 | M6x25 | 8 Nm | |
| 7AZ | Coolant connection to crankcase (heating return) | N57 D30 U/O 1 | M6x25 | 8 Nm | |
| 8AZ | Support arms to special tool | N57 D30 U/O 1 | M12x30 | 50 Nm | |
| 9AZ | Special tool 00 2 320 to special tool 00 2 300 | N57 D30 U/O 1 | M14x90 | 90 Nm | |
| 10AZ | Special tool 11 to engine block | N57 D30 U/O 1 | M10x | 35 Nm | |
| 11AZ | Component carrier to engine block | N57 D30 U/O 1 | M8x50 | 18 Nm | |
| 12AZ | Coolant pipe to engine block | N57 D30 U/O 1 | M6x25 | 8 Nm | |