11 11 Engine block
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CRANKCASE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Hexagon screws Bedplate to crankcase. | N52T | M10 x 100 | Replace screws. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | ||||
| Torque angle | 70 ° | ||||
| 2AZ | ASA screws Bedplate to crankcase. Aluminum screws/bolts are permitted with and without color coding (blue). |
N52T | M10 x 27 | Replace screws. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 15 Nm | ||||
| Torque angle | 90 ° | ||||
| 3AZ | ASA screws Bedplate to crankcase. Aluminum screws/bolts are permitted with and without color coding (blue). |
N52T | M8 x 37 | Replace screws. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Torque angle | 90 ° | ||||
| 4AZ | ASA screws Bedplate to crankcase. Aluminum screws/bolts are permitted with and without color coding (blue). |
N52T | M10 x 41 | Replace screws. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 15 Nm | ||||
| Torque angle | 90 ° | ||||
| 5AZ | Oil spray nozzles Oil spray nozzles in crankcase. |
N52T | M8 x 1 | 12 Nm | |
| 6AZ | Plug Coolant drain to crankcase. Aluminum screws/bolts are permitted with and without color coding (blue). |
N52T | M14 x 1.5 | Replace screw and sealing ring. Thread repairs are not permitted! |
50 Nm |
| 7AZ | Plug Coolant drain to crankcase. Aluminum screws/bolts are permitted with and without color coding (blue). |
N52T | M22 x 1.5 | Replace screw and sealing ring. Thread repairs are not permitted! |
50 Nm |
| 8AZ | Plug Mounting hole, gear case to bedplate. Aluminum screws/bolts are permitted with and without color coding (blue). |
N52T | M16 x 1.5 | Replace screw. Thread repairs are not permitted! |
27 Nm |