11 11 Engine block
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Main bearing bolts (steel bolts 10.9) | N20/N26 | M10x100 | Replace screws. | |
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Screws on the crankcase lower section to upper part. | N20/N26 | M8x40 | 22 Nm | |
| 3AZ | Oil spray nozzles to engine block | N20/N26 | Hollow bolt | 12 Nm | |
| 4AZ | Screw plug for upper part of gear case | N20/N26 | M22x1.5 | Replace screw with sealing ring. | 50 Nm |