11 21 Crankshaft and Bearings

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS - CRANKSHAFT AND BEARINGS

		Type	Thread	Tightening specification	Measure
1AZ	Torsion damper (hub) to crankshaft (central bolt 12.9)	N55	M18x108	Replace screw Lightly oil screw and thread
				Jointing torque	100 Nm
				Torque angle	270 °