11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Connecting rod bolt (new connecting rod with new connecting rod bolts) | S63T 0 | M9x1.25 | Release screws. Suction off crack surfaces. |
|
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Jointing torque | 30 Nm | ||||
| 3. Angle of rotation | 75 ° | ||||
| 2AZ | 1. Special screw connection only with new connecting rod bolts. | S63T 0 | M9x1.25 | ||
| 1. Jointing torque | 5 Nm | ||||
| 2. Jointing torque | 20 Nm | ||||
| 3. Jointing torque | 30 Nm | ||||
| 4. Angle of rotation | 75 ° | ||||
| 2. Loosen screws | 5. Loosen screw. | 180 ° | |||
| 6. Jointing torque | 5 Nm | ||||
| 7. Jointing torque | 20 Nm | ||||
| 8. Jointing torque | 30 Nm | ||||
| 9. Angle of rotation | 75 ° | ||||
| 3. Loosen screws | 10. Loosen screw. | 180 ° | |||
| 11. Jointing torque | 5 Nm | ||||
| 12. Jointing torque | 20 Nm | ||||
| 13. Jointing torque | 30 Nm | ||||
| 14. Angle of rotation | 75 ° | ||||
| 4. Loosen screws | 15. Loosen screw. | ||||
| 16. Jointing torque | 5 Nm | ||||
| 17. Jointing torque | 20 Nm | ||||
| 18. Jointing torque | 30 Nm | ||||
| 19. Angle of rotation | 75 ° | ||||