11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CONNECTING RODS AND BEARINGS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | ASA screw (connecting rod bolt) Connecting rod bearing cap to connecting rod. |
N52T | M8 x 47 | Replace screw. Screw washed and oiled. Joining torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | ||||
| Torque angle | 120 ° | ||||