11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Tensioning rail bearing screw and guide rail, cyl. 1 to 4, to crankcase | N63 O1 | M10x1.25 | Insert bolts dry. | 46 Nm |
| 2AZ | Tensioning rail bearing screw and guide rail, cyl. 5 to 8, to crankcase | N63 O1 | M8x1.25 | 20 Nm | |
| 3AZ | Guide rail to cylinder head | N63 O1 | M14x1.5 | Replace sealing ring. | 25 Nm |
| 4AZ | Sliding rail to cylinder head | N63 O1 | M6x67 M6x48 |
10 Nm | |
| 5AZ | Chain tensioner to cylinder head | N63 O1 | M7 | 13 Nm | |
| 6AZ | Camshaft bearing cap to cylinder head | N63 O1 | M6 | 10 Nm | |
| 7AZ | Camshaft step bearing cap to cylinder head | N63 O1 | M6 | 10 Nm | |