11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CAMSHAFT
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Tensioning rail and guide rail, cyl. 1 to 4, to crankcase | N63 | M10x1.25 | Insert screws dry | 46 Nm |
| 2AZ | Tensioning rail and guide rail, cyl. 5 to 8, to crankcase | N63 | M8x1.25 | 20 Nm | |
| 3AZ | Guide rail to cylinder head | N63 | M14x1.5 | Replace sealing ring | 25 Nm |
| 4AZ | Sliding rail to cylinder head | N63 | M7 | 15 Nm | |
| 5AZ | Chain tensioner to cylinder head | N63 | M7 | 13 Nm | |
| 6AZ | Camshaft bearing cap to cylinder head | N63 | M7 | 15 Nm | |
| 7AZ | Camshaft step bearing cap to cylinder head | N63 | M7 | 15 Nm | |