11 11 Engine Block, Cylinder Crankcase
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATION
| Bore Ø stage 0 (1) | mm | 84.000+0.02 | ||
| Bore hole Ø stage 00) | mm | No machining possible | ||
| Bore hole Ø stage 1) | mm | No machining possible | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.01 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) |
mm | 0.15 | ||
|
||||
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATION
| Grinding stages of main bearings | Main bearing | |
| Original (identification A) | mm | 55.00... 55.01 |
| Original (identification B) | mm | 55.00... 55.01 |
| Original (identification C) | mm | 55.01... 55.02 |