11 12 Cylinder Head And Cylinder Head Cover
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD AND CYLINDER HEAD COVER SPECIFICATION
| Cylinder head height: Original dimension | mm | 112.5 ± 0.05 |
| Machining limit | mm | 112.2 ± 0.05 |
| Valve guides are not available as replacement parts. | ||
| Inner diameter of installed valve guide | ||
| Original intake valve | mm | 5.00... 5.01 |
| Original exhaust valve | mm | 6.00... 6.01 |
| Tilt clearance, maximum (wear between valve and valve guide) |
mm | cannot be measured |
| Bearing of camshaft | ||
| Guide bearing intake camshaft (width) | mm | 18.90... 18.93 |
| Guide bearing eccentric shaft (width) | mm | 33.51... 33.55 |