LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Rear Axle - Special Tools) >> Rear Axle >> 0492096 Extractor >> 0492096 331300 Extractor AM >> Storage Location

Storage Location

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Y4

Z4

Fig 1: Identifying Extractor (0492096)
G04739439Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

  1. 1 = 0492097  Connector
    NOTE: (Basic body) For transmissions S5D 260Z, S5D 310Z and S5D 320Z; Discontinued, only available via complete tool
  2. 2 = 0492098  Washer
    NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
  3. 3 = 0492099  Washer
    NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
  4. 4 = 0492100  Washer
    NOTE: (Disc) Replaced by 33 1 311. (0 492 107)
  5. 5 = 0492101  Synchronizing key
    NOTE: (Thrust piece (old)) Discontinued, only available via complete tool
  6. 6 = 0492102  Synchronizing key

    Note:

  7. 7 = 0492103  Synchronizing key
    NOTE: Not available individually. Only via complete tool set
  8. 8 = 0492104  Synchronizing key

    Note:

  9. 9 = 0492105  Synchronizing key
    NOTE: For rear axle differential and for installing the camshaft sprocket on the crankshaft (M70) Discontinued, only available via complete tool
  10. 1 = 0492107  Washer
    NOTE: (Disc) Discontinued, only available via complete tool
  11. 2 = 0492108  Synchronizing key
    NOTE: For pulling the bearing inner race off the drive flange - Series: E36/5 Discontinued, only available via complete tool