LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 744 (Steering And Wheel Alignment - Special Tools) >> Steering And Wheel Alignment >> 0492043 Holding Sleeve >> 0492043 323050 Holding sleeve AM >> Storage Location

Storage Location

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

A8

Consisting of:

Fig 1: Holding Sleeve (0492043)
G09931068Courtesy of BMW OF NORTH AMERICA, INC.
  1. 0492044  Pipe
    NOTE: (Impact rod) discontinued, available as part of set of special tools only
  2. 0492045  Bush
    NOTE: (slip bush) For fitting the snap ring when a flat nut is used for steering wheel mount - Model year: Up to 73, discontinued, available as part of set of special tools only
  3. 0492046  Bush
    NOTE: (slip bush) For fitting the snap ring to the lower steering shaft bearing - Model: 2500... 3.0 CSi Deletion, only available via tool set
  4. 0492047  Bush
    NOTE: (slip bush) For fitting the snap ring when a stop nut is used for steering wheel mount - Model year: From 74 discontinued, available as part of set of special tools only