Storage Location

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Consisting of:

Fig 1: Identifying Device (0491850)

Courtesy of BMW OF NORTH AMERICA, INC.

0491851 Spindle
NOTE: With 2 nuts and 2 washers
0491852 Bush
NOTE: (Slip bush) For installing the rubber mount in the front axle support
0491853 Bush
NOTE: (Bush) For removing the rubber mount from the front axle support, for removing and installing the rubber mount in the wishbones and for press-fitting the taper roller bearing of the rear axle differential housing
0491854 Pipe
NOTE: (Support tube) For installing the rubber mount in the front axle support - series: E12
0491855 Washer
NOTE: (Flanged washer) For centering of threaded spindle and as a support disc for removing and installing the rubber mount in the front axle support and in the wishbones - series: E12
0491856 Synchronizing key
NOTE: For removing and installing the rubber mount in the front axle support - series: E12
0491857 Bush
NOTE: For installing the rubber mount in the front axle support - series: E12
0491858 Bush
NOTE: (Bush) For installing the rubber mount in the front axle support and thrust piece, for removing and installing the rubber mount in the wishbones
0491859 Bush
NOTE: (Bush) Deletion, only available via tool set