LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 741 (Propeller Shaft - Special Tools) >> Propeller Shaft >> 0491801 Gauge >> 0491801 261000 Gauge AM

0491801 261000 Gauge AM

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For aligning the propeller shaft center bearing

Consisting of:

  1. 0491802  Rail
  2. 0491803  Gauge
    NOTE: (Gauge)
  3. 0491804  Wedge
    NOTE: (Chock) For propeller shaft diameter front 50 mm, rear 70 mm
  4. 0491805  Wedge
    NOTE: (Chocks for propeller shaft (diameter front 50 mm, rear 60 mm))
  5. 0491806  Screw
    NOTE: (Knurled screws)
    Fig 1: Identifying Gauge (0491801)
    G09930754Courtesy of BMW OF NORTH AMERICA, INC.