0490482 007500 Extractor AM

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: (universal extractor Kukko 17/K) For pulling bearing inner race from drive flange on wheel bearing, rear

Consisting of:

0490483 Spindle
NOTE: (pressure spindle with bridge)
0490484 Spindle
NOTE: (adjusting spindle (2 x) with knurled nuts (4 x))
0490485 Spindle
NOTE: (pressure spindle, side)
0490486 Clip
NOTE: (adjusting jaw (2 x))
0490487 Screw
NOTE: (adjusting screws (1 x) with nut) For adjusting jaw (1 x)

Fig 1: Identifying Extractor (0490482)
Courtesy of BMW OF NORTH AMERICA, INC.
0490488 Extension
NOTE: (extension (2 x))
0490489 Bridge
Note: