LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 728 (Communication Systems - Repair) >> 8431 Hands-Free System (Microphone, Speaker) >> 84 31 550 Removing and installing/replacing hands-free microphone, driver's side

84 31 550 Removing and installing/replacing hands-free microphone, driver's side

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Lever out microphone cover (1) at front in direction of arrow.

Disconnect plug connection underneath and remove microphone cover (1).

Fig 1: Removing Microphone Cover
G04773239Courtesy of BMW OF NORTH AMERICA, INC.

Unlock retaining lug (1) and feed out hands-free microphone (2) in direction of arrow.

Installation note: 

Arrow on hands-free microphone (2) points in direction of travel.

Fig 2: Unlocking Retaining Lug
G04773240Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Disconnecting the plug connection for the handsfree microphone or emergency call button results in fault memory entries in the telephone control unit (limitation in the emergency call system).
After fitting, read out fault memory and if necessary delete entries.