LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 725 (Airbag, Audio, Navigation And Anti-Theft - Repair) >> Rear Window Aerial, TV Amplifier, Wave Trap >> 65 24 020 Removing and installing/replacing blocking circuit

65 24 020 Removing and installing/replacing blocking circuit

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

Unlock plug connections (1) and disconnect.

Release screw (2).

Remove blocking circuit (3).

Installation: 

Ensure suppressor circuit (3) is seated correctly.

Fig 1: Identifying Plug Connections, Screw And Suppressor Circuit
G08485283Courtesy of BMW OF NORTH AMERICA, INC.