52 14... Removing and installing covers on seat rails

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Front cover:

Move front seat as far back as possible.

Press retaining lugs of cover with screwdriver downwards and carefully lift off sideways from seat rail
Simultaneously detach cover

Fig 1: Removing Front Seat Cover
Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs must not be damaged.

Fig 2: Locating Front Seat Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Rear cover:

Move front seat as far forward as possible.

Press retaining lugs of cover with screwdriver downwards and carefully lift off sideways from seat rail
Press locking tab
Simultaneously detach cover

Fig 3: Removing Front Seat Rear Cover
Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs must not be damaged.

Fig 4: Locating Rear Cover Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.