LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 719 (Seats - Repair) >> Front Seat, Normal, Electric >> 52 14 425 Replacing upholstery for driver's seat

52 14 425 Replacing upholstery for driver's seat

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

The operation for removing the upholstery is described in: Replacing seat cover for driver's seat. See procedure for relevant seat type: 

- NORMAL/ELECTRIC SEAT (OLDER VERSION) 

- NORMAL/ELECTRIC SEAT (NEWER VERSION) 

- SPORT SEAT (OLDER VERSION) 

- SPORT SEAT (NEWER VERSION) 

- COMFORT SEAT (OLDER VERSION) 

- COMFORT SEAT (NEWER VERSION) 

Seat with air conditioning: 

Unfasten plug connection.

Fig 1: Locating Driver Seat Plug Connection
G09880313Courtesy of BMW OF NORTH AMERICA, INC.

Remove dividing net (1).

Remove fans (2) from upholstery.

Fig 2: Identifying Seat Fans Dividing Net
G09880314Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure fans have correct cable routing (1).

Fig 3: Identifying Seat Fans Cable
G09880315Courtesy of BMW OF NORTH AMERICA, INC.