22 11 001 Replacing right engine mount (N63)
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary work
- Secure engine in INSTALLATION POSITION .
- Remove rear UNDERBODY PROTECTION .
- Release ENGINE SUPPORT ARM (left-hand drive models only)
- Lower FRONT AXLE SUPPORT (right-hand drive models only)
Release bolt (1) and remove engine mount.
IMPORTANT:
Installation note:
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the screw connection (engine mount/engine support arm).
Tightening torque 22 11 2AZ .
To ensure play between engine mount and engine support arm, lower the engine completely before tightening the screw connection (engine mount/engine support arm).
Tightening torque 22 11 2AZ .
Installation note:
Rubber part (1) of engine mount must point to center of vehicle.