LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Body Equipment - Repair) >> Gaskets/Seals, Loose Body Components >> 51 71... Installing and removing/replacing vehicle hoist mounting

51 71... Installing and removing/replacing vehicle hoist mounting

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

Insert special tool 51 3 330 between vehicle hoist mounting (1) and vehicle underbody (2) and remove.

IMPORTANT: Risk of corrosion!
Touch up paintwork damage.
Re-establish wax layer.
Fig 1: Inserting Special Tool 51 3 330 Between Vehicle Hoist Mounting And Vehicle Underbody
G09879711Courtesy of BMW OF NORTH AMERICA, INC.