LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Body Equipment - Repair) >> Gaskets/Seals, Loose Body Components >> 51 71 038 Removing and installing/replacing front left or right wheel arch cover (front section)

51 71 038 Removing and installing/replacing front left or right wheel arch cover (front section)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks: 

NOTE: For a better view surrounding components have been omitted.
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.

Release all screws (2).

Remove the cover of the wheel arch (1).

Installation note: 

Ensure wheel arch cover (1) and cooling air routing are correctly fitted.

Fig 1: Identifying Wheel Arch Cover With Screws
G09879729Courtesy of BMW OF NORTH AMERICA, INC.