LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Body Equipment - Repair) >> Front Bumper >> 51 11 158 Replacing base plate for number/license plate

51 11 158 Replacing base plate for number/license plate

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Only use the vehicle-specific license plate baseplate.

The installation of other license plate baseplates is not permissible.

If a number plate baseplate is not offered for the corresponding national-market version, the number plate must be mounted directly on the bumper using a drilling template

Release screws (1).

Remove holder (2) towards front.

Fig 1: Identifying Screws And Holder
G09878977Courtesy of BMW OF NORTH AMERICA, INC.