64 11 819 Replacing actuator drive for fresh air/ram air

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks

REMOVE AUXILIARY ELECTRONICS BOX

Unlock plug connection (1) on AUC sensor and disconnect.

Fig 1: Identifying Plug Connection On AUC Sensor

G06886157

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on blower housing cover (2).

Lift out blower housing cover.

Fig 2: Identifying Screws On Blower Housing Cover

G06886158

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove actuator drive (2).

Unfasten plug connection (3) and disconnect.

Fig 3: Identifying Actuator Drive, Plug Connection And Screws

G06886197

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Servomotors must be readdressed in the event of replacement!

Addressing can only be carried out with the BMW diagnosis system.

Service functions:

Body
Heating and air conditioning function
Flap motors
Readdress flap motors