34 00 022 Minimum brake disc thickness
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
New brake pads may only be fitted if the brake disc thickness is greater than the minimum brake disc thickness (MIN TH).
Test specification 29 Limit value for brake disc thickness:
- BMW, MINI and Rolls-Royce vehicles: nominal dimension minus 2.4 mm
- Vehicles of BMW Motorsport GmbH (perforated brake disc): nominal dimension minus 1.6 mm
This limit dimensions is also applicable to perforated brake discs which are fitted on BMW AG vehicles as optional accessories!
-
Minimum thickness of brake pads: 3 mm.
This corresponds to the when the pad wear indicator lights up and applies to all BMW Group vehicles.
NOTE:
The type-specific limit dimensions are published for all BMW Group vehicles in the test specifications within the framework of the system data deliveries.
They can be read out in the Technical Data via the BMW Online System "www.bmw-service.com".
They can be read out in the Technical Data via the BMW Online System "www.bmw-service.com".
Brake disc thickness, front brakes
Brake disc thickness, rear brakes