LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 708 (Brakes - Repair) >> Brake Testing And Bleeding >> 34 00 010 Checking thickness of brake pad

34 00 010 Checking thickness of brake pad

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required: 

NOTE: The thickness of the outer brake pads can be determined without removing the wheels.
If necessary, move vehicle until opening for brake pad wear indicator (brake pad) can be seen through rim styling.

Insert special tool 34 1 260 wheel rim into opening for brake pad wear indicator.

Press special tool onto brake pad. Slide ring (1) in direction of arrow up to stop and read off measured value.

NOTE:
  1. Brake disc
  2. Brake pad with backplate
  3. Fig 1: Inserting Special Tool 34 1 260 Wheel Rim Into Opening For Brake Pad Wear Indicator
    G04726560Courtesy of BMW OF NORTH AMERICA, INC.

REMAINING BRAKE PAD THICKNESS OF FRONT BRAKE

REMAINING BRAKE PAD THICKNESS OF REAR BRAKE