13 90 500 Replacing tank venting valve (N63)

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks :

Check stored fault message.
Switch off ignition.
Remove FAN COWL .

Unlock connector (1) and remove.

Unlock hose (2) and detach.

Unlock hose (3) further below on intake manifold and detach.

Detach tank vent valve (4) from holder and remove.

Fig 1: Identifying Tank Vent Valve, Connector And Hoses

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock hose (1) on intake manifold and detach.

Fig 2: Identifying Hose On Intake Manifold

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Read out fault memory of DME control unit.
Delete fault memory.