61 31 038 Removing and installing/replacing switch for front passenger airbag deactivation

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 323

WARNING: Read and comply with SAFETY REGULATIONS for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.

Necessary preliminary work:

Disconnect BATTERY EARTH LEAD
Disconnect both negative battery cables atF03

Carefully lever out side cover (1) with special tool 00 9 323 .

Fig 1: Removing Side Cover Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unlock latch mechanisms (4) in direction of arrow.

Feed switch for front passenger airbag deactivation (2) out of side cover (3).

Installation note:

Make sure switch for passenger airbag deactivation (2) is correctly seated in side cover (3).

Fig 2: Removing Front Passenger Airbag Switch Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.