LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2014 >> M6 2D Convertible, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 699 (Heating And Air Conditioning - Tightening Torques) >> Air Conditioning Compressor >> 64 52 Air Conditioning Compressor

64 52 Air Conditioning Compressor

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - AIR CONDITIONING COMPRESSOR

  Type Thread Tightening specifications Dimension
1AZ Refrigerant lines to compressor F01/F02/F03/F06/F07/F10/F10h/F11/F18/F12/F13/F15/F25 M8   18 Nm
F10/F11/F15/F16/F20/F21/F22/F25/F26/F30/F31/F32/F33/F34/F35/F36/F80/F82/F83 M6   8 Nm
2AZ Compressor oil filler plug F01/F02/F03/F06/F07/F10/F11/F18/F12/F13/F15/F16/F25/F26/F20/F21/F22/F30/F31/F32/F33/F34/F35/F36/F45/F55/F56/F80/F82/F83     30±1 Nm
3AZ Compressor to crankcase N47T, F10/F11/F20/F15/F21/F22/F25/F26/F30/F31/F32/F33/F34/F36 M10   38 Nm
N13, F20/F21/F22/F30/F31 M8   22 Nm
N20, F10/F11/F20/F21/F22/F25/F26/F30/F31/F33/F34/F32/F35/F36 M10   38 Nm
N54, F01/F02 M8   19 Nm
N55, F06/F07/F10/F10h/F11/F15/F16/F18/F12/F13/F20/F21/F22/F26/F25/F30/F31/F32/F33/F34/F35/F36 M8   19 Nm
N57, F01/F02/F07/F10/F11 M8   19 Nm
N57, F06/F07/F10/F11/F12/F13/F15/F16/F26/F25/F30/F32/F31/F33/F34/F36 M10   38 Nm
N63, F01/F02/F03/F04/F06/F07/F10/F11/F12/F13 M8   21±3 Nm
N63T, F15/F16 M8   24.6 Nm
N74, F01/F02/F03 M8   21±3 Nm
F45/F55/F56 all M10   38 Nm
B47, F25/F26 M10   38 Nm
S55, F80/F82/F83 M8   19 Nm
N52, F01/F02/F10/F11/F18/F25 M8 Replace screws.  
Torque: 10 Nm
Angle of rotation: 180 °
4AZ Refrigerant lines to compressor F04 M6   10±2 Nm
5AZ Compressor holder to lower crankcase section N55, F20/F21/F22/F30/F32/F31/F33/F35/F36     19 Nm
6AZ Refrigerant lines to component carrier F10h M6   8 Nm
7AZ Holder for refrigerant lines to compressor N57X, F10/F11 M6   8 Nm