54 12 Mechanical components, slide/tilt sunroof
WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2017 BMW 550i GT xDrive, 2017 BMW 535i GT xDrive, 2017 BMW 535i GT, 2016 BMW 550i GT xDrive, and 2016 BMW 535i GT xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - MECHANICAL COMPONENTS, SLIDE/TILT SUNROOF
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Glass slide/tilt sunroof panel to gate | F01/F02/F04/F10/F18 | M5x6 w/Washer | 5 ±0.5 Nm | |
| F07/F11/F16/F25 | 4.5 Nm | ||||
| 2AZ | Cassette to body | F01/F02/F04/F10/F16/F18 | Self-locking | 7.6 Nm | |
| F07/F11/F25 | Screws, self-tapping | 5.4 Nm | |||
| 3AZ | Floating headlining to sliding rail | F01/F02/F04/F10/F11/F16/F18 | M5x6 | Observe screwing sequence | 2 ±0.2 Nm |
| 4AZ | Carriage, water channel, to connecting element | F01/F02/F04/F10/F16/F18 | 3.8 Nm | ||
| 5AZ | Panorama glass roof rear section - active and passive elements | F07/F11/F25 | 5.4 Nm | ||
| 6AZ | Both floating roofliners to gate | F11 | 2.0 Nm | ||
| 7AZ | Stacker for floating roofliner | F11 | 2.0 Nm | ||
| 8AZ | Water channel to glass lid mechanism | F11 | 2.0 Nm | ||
| 9AZ | Wind deflector to cross-member | F25 | Tighten screw with special tool 00 9 250 to 0.8 Nm. | 0.8 Nm | |
| 10AZ | Stop screw | F11 | . | 2 Nm | |